Theodore Chan of CIAP talks about the low-tech, high-gain sustainable strategies he applied to the design of his own terrace house in Singapore.
August 15th, 2019
Very conservatively speaking, any architect would have at least one experience where they are yearning to try something – an unconventional layout, a modified detail, even a new material – only to be firmly told ‘no’ by their client. So what happens when an architect is given free reign to design their own home from scratch? Joanne Goh speaks to Architect Theodore Chan, Director of CIAP Architects, on his experience.
Theodore Chan (TC): The terrace house typology is such that you only have the front and the back elevation – so the main design challenge is how you bring in light and ventilation through these limited openings.
TC: Yes I definitely wanted to do something different – this is a landed house, so I really wanted to design something that has the feel of a landed house, not a condominium. Many landed houses get broken up into smaller components internally and in the end, they lose the feel of a landed property.
TC: The program was quite different as my better half, Delphine Sng, is a potter and ceramic artist, so we planned the whole ground floor to be her atelier cum gallery/exhibition space.
Following a relatively new planning guideline called ‘Envelope Control’, where a building’s perimeter is regulated by a volumetric approach, I created a series of split levels, negating the need for a stair core, which would cut the visual width of the house. The ‘stair landing’ is thrown back into the program, instead of being sacrificed as part of the circulation. Each short flight of stairs ends at a functional space like the open kitchen ‘cafe’ and the living room.
I also used steel structures, which helped do away with ceiling space, enabling me to achieve three lofty levels in front and four lower-height levels at the back. Although it is not a new approach, it is still not the predominant construction method due to its slightly higher cost. However, I do feel that the time and space saved is worth it. Furthermore, the exposed steel decking lends a ‘workshop’ ambience that is fitting with the type of spaces that have been designed.
There is also a water feature in the house that acts as a drainage element. Instead of the usual underground drain running beneath the house, I designed a water feature that also serves as a rainwater management device, which could then overflow out to the public drain.
TC: The front facade is west facing, so I used a multi-pronged approach in mitigating the heat from the sun. The first layer is the timber trellis that forms the main facade, followed by coated glass, and finally glare-reducing blinds. I can configure it in different ways depending on the weather situation.
In our kind of environment, the most important element is actually the roof. Thus I used a concrete roof that provides good insulation and protection from the elements. Whatever fenestrations I subsequently designed in were for the purpose of bringing in light and ventilation.
The skylight at the top uses thermochromic glass, which acts like transition lens; when the sun is brighter, the glass turns darker. The skylight is also operable for heat escape via a stack-ventilation effect. Furthermore, there are hardly any walls in this house; the only areas with walls are the bathrooms, which are neatly stacked at one corner of the house.
One downside of the openness is that there is not as much privacy, but I was also fortunate that I was designing a house primarily for only two people.
TC: In the end, it is a simple house that embodies, where practicable, all that I have learnt and experienced. It was also about how to incorporate ‘low-tech but high-gain’ commonsensical and efficient strategies as much as possible, and to achieve thermal comfort through passive measures.
One of the main differences in designing for myself is that I was more daring, as I could pre-empt the outcomes of my ‘experiments’ based on my previous experiences. I also enjoyed great design freedom – down to customising my own door handle using Corten steel and timber. Having said that, Delphine, being an artist, was instrumental in some of the key features of the house. She proposed the use of recycled rain tree wood to fully clad one of the main interior walls. This provided a warm humanistic touch as well as acoustic reverberation control inside the house.
TC: It would have to be the ‘cafe’ space on the first mezzanine level. As it is at the voluminous intersection between the split levels, it is bright and breezy, and allows for an overall appreciation of the house. That’s where I spend a lot of my time.
Architect: CIAP Architects Pte Ltd (in association with MKJY Architects)
Structural Engineer: Aggies Structural Engineers
Builder: Millenium Partners
A searchable and comprehensive guide for specifying leading products and their suppliers
Keep up to date with the latest and greatest from our industry BFF's!
The Sub-Zero Wolf showrooms in Sydney and Melbourne provide a creative experience unlike any other. Now showcasing all-new product ranges, the showrooms present a unique perspective on the future of kitchens, homes and lifestyles.
In the pursuit of an uplifting synergy between the inner world and the surrounding environment, internationally acclaimed Interior Architect and Designer Lorena Gaxiola transform the vibration of the auspicious number ‘8’ into mesmerising artistry alongside the Feltex design team, brought to you by GH Commercial.
Suitable for applications ranging from schools and retail outlets to computer rooms and X-ray suites, Palettone comes in two varieties and a choice of more than fifty colours.
Savage Design’s approach to understanding the relationship between design concepts and user experience, particularly with metalwork, transcends traditional boundaries, blending timeless craftsmanship with digital innovation to create enduring elegance in objects, furnishings, and door furniture.
When iconic brands wield their influence, the ripples extend far beyond aesthetics. And so when the MillerKnoll collective formed, the very concept of design shifted, supercharging the industry’s aspiration to create a better world into an unwavering sense of responsibility to do so.
Available now across Australia, Eden TPO is setting new standards in terms of not just sustainability, but also style.
The internet never sleeps! Here's the stuff you might have missed
Savage Design’s approach to understanding the relationship between design concepts and user experience, particularly with metalwork, transcends traditional boundaries, blending timeless craftsmanship with digital innovation to create enduring elegance in objects, furnishings, and door furniture.
Dallas Rogers, Head of Urban Discipline at the School of Architecture, Design and Planning, University of Sydney, comments on the history of map-making in our cities.